Edge is the ultimate reference in-wall speaker for front, center or surround
applications. Two 6.5-inch black aluminum cone woofers, two 3.5-inch black
aluminum mid-woofers and a low-distortion Folded Motion™ XT tweeter
provide deep bass, richly detailed highs, and an open & revealing midrange.
Edge’s robust mounting-lock system is coupled with a solid aluminum chassis. When
not in use, the constant-control mounting locks are held securely within a self-contained
housing. When moved into place during installation, they couple the chassis and add
rigidity to the wall. Driver complements are held in place by a flush-mounted 3/4-inch
solid high-gloss piano black baffle that hides mounting hardware for customers who
want to showcase their speaker without a grille. The Folded Motion Tweeter rotates
easily without the need for tools to allow precise sound dispersion either horizontally
or vertically and can be performed post-installation.
Precision-Built, Advanced-Topology Vojtko™ Crossover
Vojtko crossover topology ensures vanishingly low distortion and seamless driver integration. Each crossover is
hand-built on a super-thick, double-layered black PC board using the finest polypropylene and low-DF electrolytic
capacitors, massive air coils, custom wound inductors and 16-gauge copper wire, with thermal and current
protection. Every note and nuance of the audio signal is perfectly preserved.
SPECIFICATIONS
Frequency Response
42–25,000 Hz ± 3 dB
Dispersion
80° x 30°
High Frequency Driver
1.25” x 2.4” (3.2cm x 6.1cm) Folded
Motion XT Transducer with 4.5” x 2.75”
(11.4cm x 7cm) diaphragm.
Mid Frequency Transducer
Two 3.5” (8.9cm) aluminum cone with stamped
steel basket. Concave dust cap.
Low Frequency Transducer
Two 6.5” (16.5cm) aluminum cone with cast
aluminum basket. Concave dust cap.
Sensitivity
95 dB @ 2.83 volts/ meter
Impedance
4 Ohms. Compatible with 4, 6
or 8 Ohm rated amplifiers.
Recommended Amplifier Power
20–300 watts
Crossover Frequency
400, 1800 & 3000 Hz
Weight
19 lbs. (8.62 kg)
Dimensions
27.8” x 8.3” x 3.9”
(70.5cm x 21cm x 9.9cm)
Cut-Out Dimensions
27” x 7.6” (68.6cm x 19.2cm)
Depth Required Behind Wall Surface
3.7” (9.4cm)
Projection From Wall Surface
0.2” (0.6cm)
Specifications are subject to change without notice.
